Description
The RF25N Rudder Feedback Unit with transmission link and five metre NMEA2000 Micro-C cable, is typically used on boats with inboard engines, on larger vessels, and in special applications where Virtual Rudder Feedback may not be suitable.
It connects to a rudder via a mechanical linkage and continuously reports actual rudder position to an autopilot computer – allowing the Simrad Continuum steering algorithm to make the best-informed steering decisions possible.
The RF25N connects directly to a boatÕs NMEA 2000¨ network, simplifying the cabling required for installation. It can be horizontally, vertically or upside-down mounted.
Specs:
¥ Material: Arnite T06 200 PBT
¥ Safe distance to compass: 1.0m (3.1 ft)
¥ Mounting: Horizontal, vertical, or upside down
¥ Supply and interface: 8-16V via Micro-C
¥ Power consumption: 0.4W
¥ Network load factor (NL): 1
¥ Moro-C ports (input/output): 1
¥ Cable supplied: 5m (16ft) Micro-C cable with connector
¥ Rudder angle: ±120 degrees
¥ Output signal: NMEA2000 PGN127245
¥ Accuracy: ±0.25¡ within ±5¡, otherwise ±0.5¡
¥ Repeatability: ±0.1¡
¥ NMEA compliant
¥ Transmitter link: Stainless 345mm (13.6″) with 2 ball joints.
NOTE: Ball joint stud for rudder arm requires 4.2mm diameter hole and 5mm tap.
Weight – 0.4
Product Type – Electrical & Navigation > Electronics > Autopilots
