Description
The compression flexible engine mounting is a low height mount with minimum deflection.
Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more.
Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375″).
If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm.
The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing.
Weight – 0.761
SKU – 207005
Product Type – Safety > BSS > Engine Mounts
