Description
Owatrol Corrosive Inhibiting Primer is a rust inhibiting primer suitable for finishing with both single and two-pack paints and finishes. It contains the anti-corrosive properties of Owatrol Marine Oil which enables it to stabilise the surface – it does this by penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.
C.I.P will not dissolve or break down when high solvent paints and finishes (urethane, epoxy, chlorinated rubber, synthetic, etc.) are applied to it. This makes it ideal to use as a primer for two-pack paints. The brick red pigmentation also provides enhanced protection and film-forming qualities.
• Coverage: 15 sq.m. per litre
• Cleaner: White spirits
• Touch dry 6 hours, overcoating 24-72 hours depending on finish
• Ideal uses: Marine or tropical environments. Resisting corrosive fumes. Protecting motor vehicles. Avoiding rusting on construction equipment. Protecting ballast tanks of ships Inhibiting rust development on everyday items such as railings and gates. Perfect protection where a high resistant paint or two-pack finish is necessary. Priming steel superstructure. Outstanding adherence on clean bright steel.
Weight – 0.62
SKU – PA-502
Product Type – Paint & Coatings > Topcoat Primers > Topcoat Primers
