Description
Fuel flow sensor with 10ft cable and T-connector.
Outputs:
• Fuel Flow
• Tank Fuel Used
• Trip Fuel Used
• Seasonal Fuel Used
Specs:
• One required per engine
• Up to 3 engines supported
• Fuel line diameter: 3/8″ (9.5 mm) ID
• Flow rate measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
• Added back pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
• Installation location: Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line
• Fuel type: Gasoline only*
• Hole required to route through a bulkhead: 22mm (7/8″)
• Multiple fuel flow sensors possible
*Please note: The Fuel Flow Sensor does not operate diesel engine fuel systems.
Weight – 0.7
SKU – 000-11517-001
Product Type – Electrical & Navigation > Electronics > Network Components
