Description
The Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 1″ BSP female threaded ports and measures 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head.
This bilge and deckwash pump has a bronze constructed body, stainless steel shaft and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids.
This Jabsco Clutch Pump 50080-2301 has the following Spare Parts:
Part ID | Spare Parts | Part Number | Quantity
1 | Screw | X3001-147F | 6
2 | End Cover | 11831-0000 | 1
3 | Gasket | 890-0000 | 1
4 | Impeller & Gasket Kit | 17937-0001-P | 1
5 | Wear Plate | 4156-0000 | 1
6 | Seal | SP2700-1027B | 1
8 | Cam | 934-0000 | 1
9 | Screw (3 Pack) | 91004-0090 | 1
11 | Slinger (3 Pack) | 3180-0000 | 1
12 | Seal | 913-0000 | 1
15 | E/M Clutch Field Coil (24V) | SP2300-0064FCUS | 1
16 | Screw | X3001-176FB | 3
17 | E/M Clutch Pulley Assembly (Single B Groove) | SP2300-0063RA | 1
20 | Shaft | 50087-0000 | 1
21 | Key | SP1401-10 | 1
22 | Bearing | 92600-0060 | 1
23 | Retaining Ring (3 Pack) | 18713-0000 | 1
| Service Kit | SK406-0001 | 1
Weight – 7.2
SKU – JAB-50080-2301
Product Type – Pumps > Clutch Pumps > Clutch Pumps
