Description
The Bowman GH200-3482-2 marine three pass header tank heat exchanger is typically suitable for 240kW / 322HP engines. This Bowman heat exchanger can be used with Mercedes OM401, OM421 and OM407 engines among others.
There is a raw water input connections for 1-1/2″ BSP one end cap and a raw water output connection for 1-1/2″ BSP on the other end cap. The heat exchanger is supplied with two 70mm aluminium hose connectors for the engine water inlet and outlet, as well as the required fixings (2 x nitrile O-ring seals and 8 x M12 socket screws).
Please note: the heat exchanger is no longer supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. Previously you would have needed to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger, however Bowman now supply aluminium hose adaptors. If you wish to have counter flange plates instead of hose adaptors, these are available to special order at additional cost, please contact us before placing your order if this the case.
Bowman recommend NOT fitting zinc anodes because the tubes used in the construction of the heat exchangers are copper-nickel alloy, and as such they do not require a zinc anode. It is possible that if a zinc anode is fitted it can actually destroy the copper-oxide film built up by the tube as a natural defence, which can allow the tube material to be attacked.
Weight – 24.909
SKU – 201694
Product Type – Exhaust > Heat Exchangers & Exhaust Manifolds > Combined Heat Exchanger & Header Tanks
