Description
Replacement gas detector head for Pilot gas alarms. Complete fitted with 3.5 metres of cable.
The cables for Pilot Sensor heads have now changed from a 3 core colour to a 4 core colour (The new sensor still only uses three of the cables (red, blue and yellow) with the green wire not being connected).
The old brown coloured wire corresponds to the new red wire.
The old blue coloured wire corresponds to the new blue & black wire.
The old green & yellow coloured wire corresponds to the new yellow wire.
Be sure to choose the correct sensor:
– If your alarm was purchased before 2012, it is likely you have the old type of sensor housing which does not support sensor swapping. If this is the case AND you do not intend on rerouting your sensor cables, you will need to purchase 715502-3 (Sensor with Connector Block).
– If your product was purchased after 2012 you sensor housing will support sensor swapping. You will need to purchase 715502-1 (Sensor Only).
– If you are replacing or rerouting the sensor cable completely, you will need to purchase 715502-2 (Sensor with 3.5 Meter cable).
Weight – 0.067
SKU – 715502-2
Product Type – Fuel Systems > Gas Alarms > Gas Alarms
